Features

• Patented rapid equalization bleed area
• Unique Serviceability Features
• Excess Flow Closure
• Back Check Feature
• Spring loaded polytetrafluoroethylene (PTFE) stub shaft packing
• PTFE wear pads Rulon® Bushings at critical wear points
• Manual, Cable, or Air Open/Close valve actuators
• Thermal Fusible links or plugs melt at 212 to 220°F / 100 to 104°C and allow valve closure in the event of a fire at the valve

Body Sizes and End Connection Styles (inlet x outlet)

Inlet: 3-inch / DN 80 CL300 RF Modified Flange (4.63-inches / 118 mm diameter bore) or 4-inch / DN 100 CL300 RF Modified Flange (5.88-inches / 149 mm diameter bore) 
Outlet: 3 or 4-inch / DN 80 or 100 CL300 RF

Maximum Inlet Pressure

400 psig / 27.6 bar WOG

Excess Flow Springs

3-inch: 150, 200, 250, 400, or 500 GPM / 568, 757, 946, 1514, or 1893 l/min Propane | 4-inch: 340, 400, 600, 800, or 1000 GPM / 1287, 1514, 2271, 3028, or 3785 l/min Propane |

Temperature Capabilities

-40° to 150°F / -40° to 66°C

Approximate Weights

50 Pounds / 23 kg