主要信息
產品系列
TeSys
產品名稱
D
產品類型
接觸器
產品短名
LC1D
產品簡稱
LC1D38
接觸器應用領域
應用于接通分斷正常啟動的鼠籠電機
應用于功率因數大于等于0.95的交流負載中
使用類別
AC-1
AC-4
AC-3
極數
3P
power pole contact composition
3 NO
額定工作電流 [Ie]
50 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
38 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
控制回路電壓
220 V AC 50/60 Hz
輔助觸點類型
1 NO + 1 NC
補充信息
額定工作電壓 [Ue]
Power circuit: <= 690 V AC 25...400 Hz
Power circuit: <= 225 V DC
電動機功率 (kW)
18.5 kW 在…上 500 V AC 50/60 Hz (AC-3)
18.5 kW 在…上 660/690 V AC 50/60 Hz (AC-3)
7.5 kW 在…上 400 V AC 50/60 Hz (AC-4)
18.5 kW 在…上 380/400 V AC 50/60 Hz (AC-3)
9 kW 在…上 220/240 V AC 50/60 Hz (AC-3)
18.5 kW 在…上 415/440 V AC 50/60 Hz (AC-3)
電氣壽命
1.4 Mcycles 50 A AC-1 at Ue <= 440 V
2.6 Mcycles 22 A AC-3 Ue條件下 660/690 V
1.4 Mcycles 37 A AC-3 Ue條件下 <= 440 V
機械壽命
15 Mcycles
***大操作頻率
3600 cyc/h 60 °C
動作時間
12...22 ms closing
4...19 ms opening
控制電壓限額
Drop-out: 0.3...0.6 Uc at 50/60 Hz (at <60 °C)
Operational: 0.8...1.1 Uc at 50 Hz (at <60 °C)
Operational: 0.85...1.1 Uc at 60 Hz (at <60 °C)
(~50Hz保持)功耗 (VA)
7.5 VA 60 Hz cos phi 0.3 (at 20 °C)
7 VA 50 Hz cos phi 0.3 (at 20 °C)
約定發熱電流 [Ith]
10 A (at 60 °C) for signalling circuit
50 A (at 60 °C) for power circuit
平均阻抗
2 mOhm - Ith 50 A 50 Hz for power circuit
熱消散
2…3 W at 50/60 Hz
額定短時耐受電流 [Icw]
430 A 40 °C - 1 s for power circuit
60 A 40 °C - 10 min for power circuit
150 A 40 °C - 1 min for power circuit
310 A 40 °C - 10 s for power circuit
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
與繼電器配合使用的熔絲
10 A gG for signalling circuit conforming to IEC 60947-5-1
63 A gG at <= 690 V coordination type 1 for power circuit
63 A gG at <= 690 V coordination type 2 for power circuit
過電壓類別
III
額定絕緣電壓 [Ui]
Power circuit: 690 V conforming to IEC 60947-4-1
Signalling circuit: 690 V conforming to IEC 60947-1
浪涌抑制模塊
無內置浪涌抑制模塊
輔助觸點類型
type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
type mirror contact 1 NC conforming to IEC 60947-4-1
信號回路頻率
25...400 Hz
***小開關電流 [Imin]
5 mA for signalling circuit
不重迭時間
1.5 ms on de-energisation between NC and NO contact
1.5 ms on energisation between NC and NO contact
絕緣電阻
> 10 MOhm for signalling circuit
安裝方式
導軌安裝
底板安裝
接線能力
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end
電源回路: 螺栓緊固 1 2.5…10 mm² 接線片外徑Ø: 10 mm 電纜選型: 軟線 不帶篐線端子
電源回路: 螺栓緊固 2 2.5…10 mm² 接線片外徑Ø: 10 mm 電纜選型: 軟線 不帶篐線端子
電源回路: 螺栓緊固 1 1…10 mm² 接線片外徑Ø: 10 mm 電纜選型: 軟線 帶篐線端子
電源回路: 螺栓緊固 2 1.5…6 mm² 接線片外徑Ø: 10 mm 電纜選型: 軟線 帶篐線端子
電源回路: 螺栓緊固 1 1.5…10 mm² 接線片外徑Ø: 10 mm 電纜選型: 硬線 不帶篐線端子
電源回路: 螺栓緊固 2 2.5…10 mm² 接線片外徑Ø: 10 mm 電纜選型: 硬線 不帶篐線端子
緊固扭矩
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2
電源回路: 2.5 N.m 通過 電纜連接器 用螺絲刀 Ø 6 平口 螺絲: M4
電源回路: 2.5 N.m 通過 電纜連接器 用螺絲刀 No 2 十字螺絲 螺絲: M4
高度
85 mm
寬度
45 mm
深度
92 mm
控制回路特性
AC at 50/60 Hz
額定沖擊耐受電壓 [Uimp]
6 kV conforming to IEC 60947
safety cover
無
(~50Hz吸合)功耗 (VA)
70 VA 60 Hz cos phi 0.75 (at 20 °C)
70 VA 50 Hz cos phi 0.75 (at 20 °C)
產品凈重
0.38 kg
接觸器兼容特性
M2
型號
LC1D
環境
符合標準
IEC 60947-4-1
GB 14048.4
產品認證
CCC
污染等級
3
防護措施
TH conforming to IEC 60068-2-30
IP 保護等級
IP2x front face for main circuit conforming to IEC 60529
IP2x front face for coil circuit conforming to IEC 60529
運行溫度
-40…60 °C
貯存環境溫度
-60…80 °C
周圍空氣溫度
60…70 °C at Uc
工作海拔
3000 m without derating
耐火及耐異常高溫能力
850 °C conforming to IEC 60695-2-11
抗沖擊、震動性能
Vibrations contactor open (2 Gn, 5...300 Hz) conforming to IEC 60068-2-6
Vibrations contactor closed (4 Gn, 5...300 Hz) conforming to IEC 60068-2-6
Shocks 11 ms contactor closed (15 gn) conforming to IEC 60068-2-27
抗沖擊性能 11 ms 觸頭打開 (8 gn) 符合 IEC 60068-2-27
質量標識
CE 聲明